Browse by Author or Creator

Article

MacKenzie, Donald and Li, Hongjun and Hamilton, Robert (2013) Multiphysics models for friction stir welding simulation. International Journal of CFD Studies, 10. pp. 19-30. ISSN 1642-236X

Li, Hongjun and Wood, James and McCormack, Ross and Hamilton, Robert (2013) Numerical simulation of ratcheting and fatigue behaviour of mitred pipe bends under in-plane bending and internal pressure. International Journal of Pressure Vessels and Piping, 101. pp. 154-160. ISSN 0308-0161

Rahman, Mahbubur and Lim, James B.P. and Xu, Yixiang and Hamilton, Robert and Comlekci, Tugrul and Pritchard, David (2012) Effect of column base strength on steel portal frames in fire. Proceedings of the ICE - Structures and Buildings, 166 (4). pp. 197-216. ISSN 0965-0911

Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2012) Plastic load evaluation for a fixed tube sheet heat exchanger subject to proportional loading. International Journal of Pressure Vessels and Piping, 92. pp. 11-18. ISSN 0308-0161

Behseta, Khosrow and Mackenzie, Donald and Hamilton, Robert (2011) Racheting assessment of a fixed tube sheet heat exchanger subject to in phase pressure and temperature cycles. Journal of Pressure Vessel Technology, 133 (4). 041201. ISSN 0094-9930

Carus, David and Hamilton, Robert (2011) Training shoe will improve mobility in elderly people. The Scotsman.

Hamilton, Robert and Mackenzie, Donald and Li, Hongjun (2010) Multi-physics simulation of friction stir welding process. Engineering Computations, 27 (8). pp. 967-985. ISSN 0264-4401

Neilson, Robbie and Wood, J. and Hamilton, R. and Li, H. (2010) A comparison of plastic collapse and limit loads for single mitred bends under in-plane bending. International Journal of Pressure Vessels and Piping, 87 (10). pp. 550-558. ISSN 0308-0161

Li, H. and MacKenzie, D. and Hamilton, R. (2010) Parametric finite-element studies on the effect of tool shape in friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (8). pp. 1161-1173. ISSN 0954-4054

Camilleri, Duncan and MacKenzie, Donald and Hamilton, Robert (2009) Shakedown of a thick cylinder with a radial crosshole. Journal of Pressure Vessel Technology, 131 (1). 011203-011208. ISSN 0094-9930

MacKenzie, Donald and Camilleri, Duncan and Hamilton, Robert (2008) Design by analysis of ductile failure and buckling in torispherical pressure vessel heads. Thin-Walled Structures, 46 (7-9). pp. 963-974. ISSN 0263-8231

Camilleri, D. and MacKenzie, D. and Hamilton, R. (2008) Evaluating plastic loads in torispherical heads using a new criterion of collapse. Journal of Pressure Vessel Technology, 130 (1). 011202-011210. ISSN 0094-9930

Camilleri, D. and MacKenzie, D. and Hamilton, R. (2007) Material strain hardening in pressure vessel design by analysis. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 221 (2). pp. 89-100. ISSN 0954-4089

Comlekci, T. and MacKenzie, D. and Hamilton, R. and Wood, J. (2007) Elastic stress concentration at radial crossholes in pressurised thick cylinders. Journal of Strain Analysis for Engineering Design, 42 (6). pp. 461-468. ISSN 0309-3247

Camilleri, D. and Hamilton, R. and MacKenzie, D. (2006) Gross plastic deformation of axisymmetric pressure vessel heads. Journal of Strain Analysis for Engineering Design, 41 (6). pp. 427-441. ISSN 0309-3247

Makulsawatudom, P. and MacKenzie, D. and Hamilton, R. (2004) Shakedown behaviour of thick cylindrical vessels with crossholes. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (3). pp. 133-141. ISSN 0954-4089

Abo-Elnor, M. and Hamilton, R. and Boyle, J.T. (2004) Simulation of soil-blade interaction for sandy soil using advanced 3D finite element analysis. Soil and Tillage Research, 75 (1). pp. 61-73. ISSN 0167-1987

Makulsawatudom, P. and MacKenzie, D. and Hamilton, R. (2004) Stress concentration at crossholes in thick cylindrical vessels. Journal of Strain Analysis for Engineering Design, 39 (5). pp. 471-481. ISSN 0309-3247

Abo-Elnor, M. and Hamilton, R. and Boyle, J.T. (2003) 3D Dynamic analysis of soil-tool interation using the finite element method. Journal of Terramechanics, 40 (1). pp. 51-62. ISSN 0022-4898

Muscat, M. and MacKenzie, D. and Hamilton, R. (2003) Evaluating shakedown under proportional loading by non-linear static analysis. Computers and Structures, 81 (17). pp. 1727-1737. ISSN 0045-7949

Muscat, M. and MacKenzie, D. and Hamilton, R. (2003) A work criterion for plastic collapse. International Journal of Pressure Vessels and Piping, 80 (1). pp. 49-58. ISSN 0308-0161

Hamilton, R. and Boyle, J.T. (2002) Simplified lower bound limit analysis of transversely loaded thin plates using generalised yield criteria. Thin-Walled Structures, 40 (6). pp. 503-522. ISSN 0263-8231

Muscat, M. and Hamilton, R. (2002) Elastic shakedown in pressure vessel components under non-proportional loading. ASME Publications PVP, 447. pp. 95-102. ISSN 0277-027X

Muscat, M. and Hamilton, R. and Boyle, J.T. (2002) Shakedown analysis for complex loading using superposition. Journal of Strain Analysis for Engineering Design, 37 (5). pp. 399-412. ISSN 0309-3247

Book Section

Pugh, Alistair William and Hamilton, Robert and Nash, David and Otto, S.R. (2010) Characterisation of the materials in golf ball construction for use in finite element analysis. In: Engineering Sport and Engineering Emotion. Procedia Engineering, 2 . International Sports Engineering Association, pp. 3234-3236.

Camilleri, D. and MacKenzie, D. and Hamilton, R. (2006) Evaluating pressure vessel static design loads by plastic analysis and a new criterion of collapse. In: Computational Mechanics in the UK. Queen's University Belfast, pp. 183-186.

Makulsawatudom, P. and MacKenzie, D. and Hamilton, R. (2003) Shakedown behaviour of thick cylindrical vessels with crossholes. In: Pressure Equipment Technology. Professional Engineering Publishers, London, UK, pp. 67-86. ISBN 978-1-86058-401-5

Conference or Workshop Item

Carus, D. and Hamilton, R. and Harrison, C.S. (2010) Motorised shoe mechanisms to apply chaotic perturbations for gait training. In: 1st International Conference on Applied Bionics & Biomechanics, ICABB-2010, 2010-10-14 - 2010-10-16, Venice, Italy.

MacKenzie, D. and Li, Hongjun and Hamilton, R. (2009) Multiphysics models for friction stir welding simulation. In: NAFEMS World Congress and Exhibition, 2009-06-16 - 2009-06-19, Crete, Greece.

Rahman, M. and Lim, J. and Hamilton, Robert and Comlekci, Tugrul (2009) Dynamic behaviour of portal frames at elevated temperature. In: Simulea Customer Conference, 2009-05-18 - 2009-05-21, London.

Boyle, J.T. and Hamilton, R. and Dempster, W.M. and Nicol, D.J. (2002) Experience with classroom feedback systems to enable Socratic dialogue in large engineering classes. In: 2nd Annual Symposium on Engineering Education, 2002-01-01, London, UK.

Boyle, J.T. and Hamilton, R. and Dempster, W.M. (2001) Approaches to teaching and learning in engineering education (NATALIE) project. In: International Colloquium: Global Changes in Engineering Education, Proceedings of Ed-Media 2001 World Conference on Education Multi Media, 2001-10-01, Berlin, Germany.

Boyle, J.T. and Hamilton, R. and Dempster, W.M. and Nicol, D.J. (2001) The use of classroom feedback systems to enable active learning in large engineering mechanics classes. In: International Conference on Engineering Education, 2001-08-06 - 2001-08-10, Oslo, Norway.

Abo-Elnor, M. and Boyle, J.T. and Hamilton, R. (2001) Soil-tool interface experimental evaluation and constitutive models. In: 18th Canadian Congress of Applied Mechanics, Newfoundland., 2001-06-03 - 2001-06-07, St. John's, Newfoundland, Canada.