Characterisation and assessment of an integrated matching layer for air coupled ultrasonic applications

Kelly, S.P. and Hayward, G. and Alvarez-Arenas, T.E.G. (2004) Characterisation and assessment of an integrated matching layer for air coupled ultrasonic applications. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 51 (10). pp. 1314-1323. ISSN 0885-3010 (http://dx.doi.org/10.1109/TUFFC.2004.1350960)

Full text not available in this repository.Request a copy

Abstract

A novel ultrasonic matching layer for improving coupling between piezoelectric transducers and an air load is presented and the results of a theoretical and experimental program of work are provided. A combination of a porous material that has very low acoustic impedance with a low-density rubber material forms the basis of the approach. These matching layers were first analyzed experimentally using scanning electron and optical microscopy to determine the microscopic structure. Air-coupled resonance measurements were then performed to reveal the acoustic parameters of the individual layers that were identified within this multilayered structure. These data were then incorporated into a conventional linear model, and this has been verified and used to study performance and produce designs. Close correlation between experiment and theory is demonstrated. The most efficient designs have been implemented in a pitch/catch air-coupled system, and an improvement in received signal amplitude of 30 dB was achieved when compared with the unmatched case.