Measurement of adsorption of a single component from the liquid phase : modelling investigation and sensitivity analysis

Heslop, M.J. and Schaschke, C.J. and Sefcik, J. and Richardson, D.J. and Russell, P.A. (2008) Measurement of adsorption of a single component from the liquid phase : modelling investigation and sensitivity analysis. Adsorption, 14 (4-5). pp. 639-651. ISSN 0929-5607 (https://doi.org/10.1007/s10450-008-9134-9)

[thumbnail of strathprints015030]
Preview
Text. Filename: strathprints015030.pdf
Accepted Author Manuscript

Download (2MB)| Preview

Abstract

In this work, we consider an alternative approach for the measurement of adsorption from the liquid phase. Consider a mixture consisting of a non-adsorbed component (B) and an adsorbed component (A) present at some low concentration. Initially, a feed of component B only flows through a column packed with an adsorbent. Then, the feed is switched to the mixture of A and B. As soon as the mixture enters the column, there will be a reduction in the outlet flow rate as component A leaves the liquid phase and passes into the adsorbed phase. There are three stages to this work. The first is to develop overall and component balances to show how the amount adsorbed of component A can be determined from the variation in the column outlet flow rate. The second is to determine the actual variation in the column outlet flow rate for both plug flow and axial-dispersed plug flow. The final stage is to consider the suitability of a gravity-fed system to deliver the feed to the column. An analysis of the results shows that the experimental arrangement should be able to accurately monitor adsorption from the liquid phase where the mass fraction of the solute is of the order of 1%: the limiting experimental factor is how constant the volumetric flow rate of the liquid feed can be maintained.