Picture of wind turbine against blue sky

Open Access research with a real impact...

The Strathprints institutional repository is a digital archive of University of Strathclyde research outputs.

The Energy Systems Research Unit (ESRU) within Strathclyde's Department of Mechanical and Aerospace Engineering is producing Open Access research that can help society deploy and optimise renewable energy systems, such as wind turbine technology.

Explore wind turbine research in Strathprints

Explore all of Strathclyde's Open Access research content

Risk analysis for RoPax vessels

Konovessis, Dimitris and Vassalos, Dracos and Mermiris, Georgios (2008) Risk analysis for RoPax vessels. WMU Journal of Maritime Affairs, 7 (1). 109–131.

[img]
Preview
PDF
Risk_Analysis_for_RoPax_VesselsWMU_Journal.pdf - Final Published Version

Download (404kB) | Preview

Abstract

The paper presents the results of a recent risk analysis study for RoPax vessels, carried out as part of the activities of the SAFEDOR Integrated Project. The objective of this study was to investigate the causes of hazards during RoPax operation and quantify, to the extent possible, their frequencies and consequences. Potential scenarios initially identified and prioritised during a Hazard Identification (HAZID) session were used in the pro cess. The work has been performed in accordance with the IMO FSA Guidelines (IMO 2002). A previous comprehensive study on the safety assessment of RoPax vessels sailing in North West European waters, covering the period until 1994, was used as the basis in putting together a high-level risk model for the current study. All scenarios are presented in the form of event trees, quantification of which is done on the basis of world-wide accident experience (from 1994 to 2004), relevant past studies and judgment. The study estimates the risk of loss of life among passengers and crew (by calculating for each scenario the In di -vidual Risk, the Potential Loss of Life – PLL and plotting the corresponding F-N curves), and compares them with current risk acceptance criteria. The resulting high-level risk model is used to provide recommendations for improvement in the form of proposed risk control options (RCOs).